Skip to Content
search
Professionals
Product Catalog

Product Detail

Guardian 100% Acrylic Exterior Finish, Flat (GL1)

Features

  • Low VOC with excellent hide
  • A premium quality 100% Acrylic Latex exterior finish for use on stucco, masonry, primed wood, exterior metal and galvanized surfaces
  • Contains an Environment Canada approved mildewcide
  • Flat finish minimizes light reflection to mask surface imperfections and irregularities
  • High moisture vapour permabilitiy to minimize the risk of blistering and peeling
  • Good alkali resistance on concrete surfaces
  • Fortified with X-link for early rain resistance

Recommended Uses

  • For exterior stucco, masonry, primed wood, fibre cement board, metal or weathered vinyl or aluminum siding
  • For use on new Tilt-up and high-rise construction
  • New colours for vinyl siding must by lighter than original colour. Apply at temperatures above 3°C (37.4°F)
  • A stain blocking primer is strongly recommended for application to new cedar wood

Description

Guardian Exterior Flat 100% Acrylic Latex is a premium latex finish for use on stucco, masonry and primed wood. This product provides a durable film with excellent resistance to fading, chalking, alkali burnout & surfactant leaching. A flat finish that masks the effects of uneven light refraction on irregular surfaces such as concrete precast, tilt-up precast construction and all exterior textured substrates. This product may also be applied to exterior metal and galvanized surfaces where proper surface preparation and applicable primers will be required. Provides a rich, even finish with excellent hiding properties. Guardian Flat Latex can be applied when air and substrate temperatures are as low as 3°C (37.4°F).

  • Product Code: 02603
  • Sheen: GL1 "Flat" or "Matte"
  • Category: Exterior Topcoat
  • Chemistry: 100% Acrylic Latex

 

Product Documents

Safety Data Sheets:

 

Safety Data Sheet Updates
Please note that, in accordance with Section 5.12(1) of the federal Hazardous Products Regulations under the Hazardous Products Act, Cloverdale Paint updates its Safety Data Sheets (SDSs) when new information becomes available that:

  • changes the classification of the product within a hazard class or subcategory,
  • results in classification under a different hazard class, or
  • alters the recommended protective measures.

The revision date—or the issue date, if no revision date is provided—reflects the most current formulation of the product and the corresponding hazard and safety information as known by Cloverdale Paint at the time of publication.