Skip to Content
search
Professionals
Exterior Paints

Product Detail

WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat (GL1)

Features

  • Excellent hiding and durability in a rich, flat finish
  • A premium quality 100% Acrylic Latex exterior finish for use on stucco, masonry, primed wood, exterior metal and galvanized surfaces
  • Contains an Environment Canada approved mildewcide
  • Flat finish minimizes light reflection to mask surface imperfections and irregularities
  • High moisture vapour permabilitiy to minimize the risk of blistering and peeling
  • Good alkali resistance for application to concrete

Recommended Uses

  • For exterior stucco, masonry, primed wood, metal or weathered vinyl or aluminum siding
  • Due to the very dark nature of 02007 factory-mixed black, not recommended for vinyl siding
  • New colours for vinyl siding must by lighter than original colour. Apply at temperatures above 5°C (41°F)
  • A stain blocking primer is strongly recommended for application to new cedar wood

Description

CoverCoat Exterior Flat 100% Acrylic Latex is a premium latex finish for use on stucco, masonry and primed wood. An ideal choice for masking the effects of uneven light refraction on irregular surfaces such as concrete “tilt up” construction and all exterior textured substrates. Provides a rich even finish with excellent hiding properties. This product may also be applied to exterior metal and galvanized surfaces where proper surface preparation and applicable primers will be required. Provides a rich, even finish with excellent hiding properties. CoverCoat Flat Latex can be applied when air temperatures are as low as 5°C (41°F). Approved by the Master Painter's Institute under category # 10, gloss level 1.

  • Product Code: 02203
  • Sheen: GL1 "Flat" or "Matte"
  • Category: Exterior Topcoat
  • Chemistry: 100% Acrylic Latex

 

Product Documents

Safety Data Sheets:

 

Safety Data Sheet Updates
Please note that, in accordance with Section 5.12(1) of the federal Hazardous Products Regulations under the Hazardous Products Act, Cloverdale Paint updates its Safety Data Sheets (SDSs) when new information becomes available that:

  • changes the classification of the product within a hazard class or subcategory,
  • results in classification under a different hazard class, or
  • alters the recommended protective measures.

The revision date—or the issue date, if no revision date is provided—reflects the most current formulation of the product and the corresponding hazard and safety information as known by Cloverdale Paint at the time of publication.