For Your Home


What is Dryfall paint?

Project Scenario

Heather, the commerical painter, wants to paint a grocery store ceiling white without masking the floors. This can be done using Cloverdale Paint dry fall paint.


  • Pressure wash, if possible or use high pressure air blast.
  • Broom clean if only choice
  • Solvent wipe any exposed galvanized.
  • Wood may need a primer coat and Ferrous metal may need to be spot primed prior to application. Please test.
  • Pre-finished metal should be clean and deglossed.

Primer Coat

Cloverdale Paint dry fall products are self priming. Please see the preparation notes above.

Top Coat

Best: _________
Better: _________
Good: _________


Caution! Things to consider

  • Verify the multiple types of substrates to be coated and pre-prime, if necessary.
  • Flash rusting is a common problem when water based dry fall comes in contact with unprimed metal. Spot prime and touch up.
  • Do not use alkyd dry fall paint on galvanized substrates. Over time saponification will occur, causing delamination of the coating.
  • Insulation, as a substrate, requires a spot test to ensure adhesion.
  • Products are designed to dry before 15 feet at 77°F at 50% relative humidity. Changes in temperature and humidity will effect dry fall distances.
  • Special Order dry fall sheens and colours are available.

For more information about this or other painting tips & techniques, our paint & coatings products, or general DIY paint and coatings questions, please contact us online or by calling (604) 596-6261.