Prime Solution

05130 PrimeSolution Interior/Exterior Latex Stain Blocking Primer

Description

A premium interior/exterior acrylic latex primer/undercoat for use on new or previously painted woodwork and siding. Provides excellent adhesion to moderately chalky surfaces. May also be used to seal stucco and masonry and to prime galvanized metal. This product provides optimum sealing, excellent adhesion, resistance to peeling and cracking with maximum hiding. Meets Environment Canada Volatile Organic Compounds in Consumer and Commerical Products regulations for primers and sealers. Approved by the Master Painter's Institute under category # 6, 39 & 137.

Features

• Excellent adhesion to moderately chalky surfaces. 
• Provides optimum sealing, resistance to peeling and cracking  with maximum hiding
• Good application properties by brush roller or spray
• Good low temperature tolerance and can be applied as low as 5°C
• Alkali resistant

15130 Prime Solution Interior/Exterior Alkyd Stain Blocking Primer

Description

Prime Solution premium interior / exterior alkyd (oil base) primer is designed for use on new or previously painted woodwork and siding including plywood, particle boards, oriented strand board and dimensional lumber. It is formulated to prevent staining and tannin bleeding on painted woods such as Redwood and Cedar. It provides optimum sealing, stain blocking, adhesion and holdout properties. It resists peeling, cracking, mildew and provides an excellent base for subsequent top coating. Approved by the Master Painter's Institute under category #5 and meets Environment Canada's VOC limits under Category #37.

Features

• Formulated to prevent staining and tannin bleeding on painted  woods such as Redwood and Cedar. 
• It provides optimum sealing, stain blocking, adhesion and  holdout properties.
• It resists peeling, cracking, mildew and provides an excellent  base for subsequent top coating.

05133 Prime Solution Exterior Alkali Resistant Primer

Description

Prime Solution Exterior Alkali Resistant Primer is a water-based, pure acrylic primer intended for use on "hot" masonry or plaster surfaces to minimize discoloration caused by alkali burning. The product features high brightness and coverage properties, is compatible with a wide range of architectural topcoats, and meets relevant VOC emission targets. This product is approved by Master Painters Institute under Category #3.

(Container sizes:  Please speak with your Cloverdale Branch or Sales Representative about container size availability.)

05910 Prime Solution Acrylic Bonding Primer

Description

Prime Solution Interior / Exterior Waterborne Acrylic Speed Primer is the ultimate in high adhesion, and carries much lower odour than conventional quick-drying primers for use on hard, non porous surfaces. This product features high hiding properties and is ideal where drastic colour change is required. Approved under the Master Painter's Institute under category #17.

Features

•  Excellent adhesion, high hiding properties
•  Easy application, good build properties
•  Low odour, low VOC's
•  100% acrylic resins
•  Quick dry, early topcoat
•  Good topcoat compatibility
•  Excellent "bonding" primer

(Container sizes:  Please speak with your Cloverdale Branch or Sales Representative about container size availability.)