CoverCoat Paints
WeatherOne

WeatherOne® CoverCoat

Our WeatherOne CoverCoat Exterior Latex coatings are premium latex finishes for use on stucco, masonry and primed wood and other properly prepared substrates. CoverCoat Flat Latex is an ideal choice for masking the effects of uneven light refraction on irregular surfaces. Provides a rich even finish with excellent hiding properties. CoverCoat Satin and Semi Gloss Latex are premium quality 100% Acrylic exterior finishes and are ideal choices for aluminum and weathered vinyl siding. (Dark colours are not recommend on vinyl siding as heat absorption can cause the vinyl to ripple.) WeatherOne CoverCoats are super premium quality products with excellent hiding and durability in satin, flat or semi-gloss formulas. CoverCoat Flat is approved by the Master Painter’s Institute under category #10. CoverCoat Satin is approved by the Master Painter’s Institute under category #15 and CoverCoat Semi Gloss is approved by the Master Painter’s Institute under Category #11



0220 Series Flat Latex

View Technical Information

Description

WeatherOne Covercoat Exterior Flat Latex is a premium latex finish for use on stucco, masonry and primed wood. An ideal choice for masking the effects of uneven light refraction on irregular surfaces such as concrete “tilt up” construction and all exterior textured substrates. Provides a rich even finish with excellent hiding properties. This product may also be applied to exterior metal and galvanized surfaces where proper surface preparation and applicable primers will be required. Provides a rich, even finish with excellent hiding properties. CoverCoat Flat Latex can be applied when air temperatures are as low as 5°C (41°F). Approved by the Master Painter's Institute under category # 10, gloss level 1.

Recommended Uses

•  For interior or exterior stucco, masonry, primed wood, metal or weathered vinyl or aluminum siding.
•  Due to the very dark nature of 02007 factory-mixed black, not recommended for vinyl siding.
•  New colours for vinyl siding must by lighter than original colour. Apply at temperatures above 5°C (41°F).
•  A stain blocking primer is strongly recommended for application to new cedar wood.



0201 Series Satin Latex

View Technical Information

Description

A super premium quality 100% Acrylic Latex exterior finish for use on stucco, masonry, primed wood, exterior metal and galvanized surfaces where proper surface preparation and applicable primers are required. An ideal choice for aluminum and weathered vinyl siding (dark colours not recommended on vinyl siding as heat absorption can cause vinyl to ripple). A super premium quality product with excellent hiding and durability in a rich, low sheen finish. Meets the requirements of CAN/CGSB 1-138M. Qualification No. 80062. Approved by the Master Painter's Institute under category # 15, gloss level 3-4. 02010 can be applied when air temperatures are as low as 5°C (41°F).

Recommended Uses

•  Use on interior or exterior stucco, masonry, primed wood, metal, weathered vinyl or aluminum siding.
•  Repaint colour of vinyl siding must by lighter than original colour.



0212 Series Semi-Gloss Latex

View Technical Information

Description

A super premium quality 100% Acrylic Latex exterior finish for use on stucco, masonry, primed wood, exterior metal and galvanized surfaces where proper surface preparation and applicable primers are required. An ideal choice for aluminum and weathered vinyl siding (dark colours not recommended on vinyl siding as heat absorption can cause vinyl to ripple). A super premium quality product with excellent hiding and durability in a rich, semi gloss finish. Approved by the Master Painter's Institute under Category # 11, Gloss Level 5. This product contains a mildewcide.

Recommended Uses

•  For interior or exterior stucco, masonry, primed wood, metal or weathered vinyl or aluminum siding.
•  New colours for vinyl siding must by lighter than original colour. Apply at temperatures above 5°C (41°F).